 Transporter Style Nosecone Suitable for your scratchbuilding projects. To scale with 12" transporters These nosecones are NOT re-castings of other kits or reworks, but are cast from a new scratchbuilt master pattern, beautifully detailed by Michael Dentzer. They are suitable for your scratchbuilding projects or as replacements for other kit parts. They are solid cast in one piece from Urethane resin and require very little cleanup, just sand off the tube (used to pour the resin) and the seams at the rear. The photos below show an unretouched raw, uncleaned and unaltered casting. Colour may vary.  These 12" scaled nosecone castings are $15 USD each plus shipping (ship wt. approx. 190g, kit wt. 50g). Please send an email to "jim@smallartworks.ca" for availability. Do not send any money until your request can be confirmed! Please keep in mind that these are NOT mass produced but made in low numbers for individual fans as requested, therefore delivery time may take longer than you may expect. |
